-
I wonder why the first parameter, stadsverwarming energy in GJ is divided by 1000. I have to divide it by 100 to keep the value equal to the display value. I have also included the 10th parameter beca…
-
I'm sorry to inform you that the reload issue is still present on my Samsung A7 with companion app.
It looses connection and reload UI .
If I delete bubble card integration is ok
System log says
…
-
### Description
I have installed a "P1 slimmemeter" (ethernet version) following the guidelines provided https://www.zuidwijk.com/using-esp-link/#home-assistant.
I'm running DSMR-reader in Home Ass…
-
I have installed the application and it is works fine, but one thing I do not understand. The sensor.stadsverwarming_energy only shows an update once a day? The last few days it is around 4 o'clock in…
-
### The problem
I'm trying to install the Landis+Gyr Heat Meter integration. I have a Landis GYR UH50 (Eneco Stadsverwarming) meter connected with an optical head sensor via USB.
Device Path: /d…
-
### Did you read the instructions?
- [X] I have read the [README](../blob/master/README.md).
### The request
Setting up this integration is well-documented, and it didn't take me long to have the K…
-
### The request
Can you make the project suitable for energy dashboard, the platform don't allow state_class.
If you need some information let me know.
### Additional information
_No response_
-
### The problem
In HA 2022.11 and HA2022.12 there has been changes to add GJ as a correct type of measuring in the Energy Dashboard, specifically under "gas".
It turns out when you go to add a sen…
-
Ik zie bij P1 Heat onbekend staan. Komt dat omdat de informatie niet uitgelezen kan worden? Ik zie die waardes namelijk wel in de Toon staan.
-
Stadsverwarming is geen zone. (zie riolering) Utiliteitsnet is geen zone.