-
**Describe the bug**
If enabled CONFIG_ADC and CONFIG_PM, you can read just once using `adc_read()`, then Zephyr halts.
**To Reproduce**
Steps to reproduce the behavior:
1. add the `nucleo_wl55j…
-
Building with the default configuration works fine. That said, when changing the pinout in CubeMX (e.g., enabling I2C1) regenerating the code throws several errors as shown below regarding lora_app_ve…
-
It would be good to have a checklist in the source file of every example, to ensure people trying to use examples for different chips/boards know what they need to do. This is a VERY common question i…
-
#### Description
add periph_rtc to STM32WL55JC cpu and boards (nucleo-wl55jc, lora-e5-dev)
RTC is important for dataloggers.
```
periph_rtc]> gmake BOARD=lora-e5-dev
There are unsatisfied f…
-
The STM32WL series includes the radio IP from an SX126x with hardwired SPI on the die with a Cortex-M4 (and optionally a Cortex-M0).
Would it be possible to run this driver to use the internal SX12…
-
**Describe the bug**
I am also not able to upload sketches from the Arduino IDE on MacOS. I have STM32cubeprog installed and working on my Mac but thats what I get from the Arduino IDE:
```
Sketc…
-
**Summary:**
Update our repo to use the latest FW package v.1.1 released by ST 0n 23/07/2021.
ST [v1.1 STM32CubeWL MCU package](https://github.com/STMicroelectronics/STM32CubeWL/tree/v1.1.0) an…
-
### Description of defect
As #15285 we've got some issues with USART2 at 2400bps. We use classic `BufferedSerial`
We have different brand of connected devices working at 2400 bps and when us…
-
Maybe I did not understand the schematic correctly, but I don't see a way to cut the power supply for the STM32L052 used for programming when the board is run from a battery. This leads to excessive p…
-
Is any work being put toward ADC (and/or DAC) for the STM32WL chipset?
Any pointers or advice as to best practices in implementing this?