-
@orlox suggested that we impose a (smooth) limit on the convection speed in TDC, and implemented this in the `tdc_gamma_no_cs` branch.
I'd just like to have a bit of discussion about the physics in…
-
Hi: I don't use github much, and I think this is the only spot where I can put some words... I am running a reactingFoam (CHEMKIN combustion with RAS) and would like to try making a rhoReactingCentr…
-
I use hifiles to compute a Ma=2.8 flow, I found it is very unstable when strong shock occurs. I read the code, found that the artificial viscosity is not added in 3D case(in function shock_capture_con…
-
According to the documentation, all drag is calculated assuming a fully turbulent boundary-layer for rockets. Although small, I think the laminar region should be investigated; the docs say that "the …
-
Hi All,
Just a quick concern I have had/wanted to ask about. I currently use UCNS3D on a RedHat HPC system at my university.
1) When conducting a transient Euler equations run, my code works for…
plaad updated
3 months ago
-
It may be great to add a brief summary of each elixir at the top. For example, this would allow to search for keywords in them and make our examples easier to discover. If we decide to move some elixi…
-
Good morning,
blastFoam has been tested on simple case: 2D Poiseuille flow, where the pressure drop has been set between the inlet and the outlet of the 2D pipe. The maximum velocity expected at th…
-
**Describe the bug**
I found a bug while testing the SST model.
I'm trying to simulate the high Mach number flat plate case. The flow condition is below.
Temperature (K) | Unit Re (1/m…
sun5k updated
3 months ago
-
https://slack-files.com/files-pri-safe/T03BMF0R2-F0A3LCQ3C/api-presentation_1_.pdf?c=1441299236-4641d956f1354dd200dd184c1f1fc76fc59b9d2c
-
Test project C:/build
Start 25: test_2d_eulerian_supersonic_flow_new_BC
1/1 Test #25: test_2d_eulerian_supersonic_flow_new_BC ...***Failed 247.04 sec
Particle relaxation was set to default (0)…