-
Hi, is there a way to support ebyte E22400M30S Modules?
1W Output and rx preamp onboard.
Kevin (DL5OP)
-
After creating this issue
https://github.com/PaulSchulz/esphome-lora-sx126x/issues/1
I build new hardware with ESP32 and SX1262(Waveshare) module, but it is not working
Previously I am using th…
-
There seems to be a mismatch between the size of the local arrays that hold the return value at functions in sx1262.c and the actual return value as it is states in the datasheet https://semtech.my.s…
-
GH Actions Failure: https://github.com/vshymanskyy/lbm-micropython/actions/runs/11120545524/job/30897750176#step:7:228
This is the line:
https://github.com/vshymanskyy/micropython/blob/bfe115ee37a…
-
Use the SPI Driver to setup functions to configure and interact with the RFM95 LoRa Module
-
I was trying to work around this issue https://github.com/Lora-net/LoRaMac-node/issues/1594 by calling `Radio.Sleep()` after LoRaMAC init with NVM restore. My initial issue is this one https://github.…
lff5 updated
3 months ago
-
The current SX126x sync word (0x0F0F) does not match with any sync word supported by SX127x. Apparently, when using 0x1424 as the sync word, the SX127x will match as long as the 4 MSb are 0x1 or the 4…
-
W (402) MAIN: Disable TCXO
E (5322) task_wdt: Task watchdog got triggered. The following tasks/users did not reset the watchdog in time:
E (5322) task_wdt: - IDLE0 (CPU 0)
E (5322) task_wdt: Tasks…
h4alo updated
1 month ago
-
I've been testing your library on a SX1262 and I've seen that method 'setTxPower' fails for values lower than 14dBm.
I'm new at programming but I think that, on file "SX126x.cpp" -> void SX126x::set…
-
### Category
BLE
### Hardware
Other
### Firmware Version
2.4.3.91d6612
### Description
**What happened**
1. Install new firmware (2.4.3.91d6612)
2. Open phone to pair to Heltec Mesh Node T114…