-
As I See PCB / gerbers are missing. I'm going to prepare for myself @ KiCad format. If you are interested I could share it for you.
Is this project well tested / works good enough?
-
Hi, sorry for asking this here.
I am currently building (well, designing for now) a tapuino into an old 1530 case. I want to keep it as original as possible, so I put the display and the sd-card into…
-
Running taupino 2.8
Repro Steps:
1) Choose Play
2) Scroll to desired TAP filename
3) Type in "Load"
4) See message to press play button
5) Press "Select" button on Taupuino
6) Progress indi…
-
Hi
Could you please post the latest firmware (2.10.0) in hex format so that I can program with my tl866ii plus programmer as I don't know how to generate from the compiler method.
Cheers Brad
-
Hello.
First of all, thank you for this great little device. I bought mine from Edu Arana, some time ago, but tested it just few days ago.
https://github.com/arananet/Tapuino-Reloaded
I have s…
-
Hi,
First of all - thanks for the project.
I think I would better open an issue on tapuino repo, but it is outdated for sure.
Anyway - that's the problem. I have a lot of microSD HC cards fo…
Sgw32 updated
2 years ago
-
Hi, thanks for this great script, first of all!
I tried to convert [this project](https://easyeda.com/editor#id=a4ae24f9d25944dd941b2338bc59c047|ff91d635dfd74f708e79f0ebbe7634b4) but when opening t…
-
Which parameters (TICKER RATE, etc...) should I change to make this TAP work?
https://www.dropbox.com/s/rifwscth1kie20y/C16VB12.zip?dl=0
For "doesn't work" I mean: it loads first prg, which is a t…
-
Hello, I have a proposal. Tapuino shouldn't finalize a recording when the motor is turned off. It should just wait for either the motor to be started again or the user to press "stop". I'm playing wit…
-
Adding support for format 2 (halfwave) TAP playback would extend the reach of the Tapuino to these platforms.