-
At this moment two possibilities for room temperature readings are possible: internal temperature and an external wired sensor.
I would like to use a temperature reading connected wireless to HA as t…
-
I am using:
* A custom board based on the Leonardo (Atmega32u4)
* TMAG5273A1
* Arduino IDE 2.2.1
* SparkFun TMAG5273 Arduino Library 1.0.3
* Board powered by USB at 5.08V, serial port workin…
-
The Hanshow Nebular 350 tags are reporting a temperature of 0.
I have checked and can confirm the ATC1441 BLE firmware is able to report temperature. So would love for this to come across to OEPL.
-
I believe this should be relatively straightforward as the AC system supports central control. It would be highly beneficial to have the option to use Home Assistant (HA) sensors to provide temperatur…
-
This one is what I get when I select my GPU Temp reading.
![image](https://github.com/shayne/hwinfo-streamdeck/assets/22861238/8688bc88-7f1f-457f-85db-ccb6957c69e5)
This is what's available for my…
-
Right after system start, the supposed to be VRM temperature sensor (0x003e) readings are lower than the ambient temperature.
zeule updated
2 months ago
-
### Issue related to
Sunsynk / mbusd Home Assistant Add-On
### Describe the issue/bug
Since I connected the Felicity Battery today, the Addon no longer works properly. The values are no longe…
-
Would be nice to have such functionality implemented. The comad for this is:
`fefe7d**0c**4f9bfe0d`
where **0c** is a number of sensor input, the response would be:
`fefe7d0c**0097**3e81fe0d`…
-
Setup the table/models needed to store sensor readings. See the proposed schema below:
```sql
create table sensor_readings (
id bigint primary key generated always as identity,
sensor_id big…
-
Temperature readings are ok, but sometimes it suddenly gets negative values between others,
last readings in summer where 26° , 24° , 22° , 26°, 28° then **-26° -22°** then 29° , 26° ...
very s…