-
Hi,
In some cases netcat to host isn't the solution, eq. NAT'ed stick.
Will it be possible to share precompiled ftp server, I think, that something like tftpd is good enough.
It will be great to em…
-
### Describe the bug
When running cobbler mkloaders/sync, no *_menu_items.cfg files are created, and EFI boots are not given a selection of profiles, only "local".
### Steps to reproduce
1. R…
-
Linux 5.10.20-1-lts
```
INFO(tftpd): Serving file tp_recovery.bin to host 192.168.0.2...
sysctl: cannot stat /proc/sys/net/inet/udp/maxdgram: Нет такого файла или каталога
INFO(tftpd): Serving f…
-
I'm using isc-dhcp-server that responds to the PI:
TIME: 2018-02-04 18:44:04.141
IP: 192.168.1.80 (8:0:27:b1:5f:9b) > 192.168.1.12 (b8:27:eb:ac:1c:1)
OP: 2 (BOOTPREPLY)
HTYPE: 1 (Ethe…
-
I currently face the issue where the TFTP server seems to answer with the wrong IP address (from Docker). I am using the default docker-compose.yml file.
`10.10.0.103` is my client, `10.10.3.6` is …
-
```
root@APU2-SHAWSECURE:/tmp# python3 hiktest.py
File "hiktest.py", line 65
except hikvision_tftpd.Error, e:
^
SyntaxError: invalid syntax
```
-
Hello All:
I am trying to setup HTTP provisioning instead of TFTP due to decreasing the Cisco phone's boot-up time. I am not sure whether to post this issue here at `sccp_manager` or under `provisi…
-
Hi,
I made sd card via cmd :
`sudo ./mk_mmc.sh --mmc /dev/sdd --dtb tegra124-jetson-tk1 --use-stable-kernel --firmware --distro stretch`
or
`sudo ./mk_mmc.sh --mmc /dev/sdd --dtb tegra124-je…
-
So, my adventure has yielded some interesting results.
I've been putting debug instrumenting/tracing statements into the code as I go along and I've found out that indeed the code in `pxegen` is th…
-
### Describe the bug
Trying to upgrade lede 17.01.4 to recent versions of Openwrt (I tried 22.03.5 and 22.03.4 stable releases.)
I get the following error from the Redboot TFTPD:
TFTPD: Incoming …