-
- [ ] design and document subcircuit. Add to master.
- [ ] using relevant subcircuit, demo sensor alone, verify accuracy
- [ ] Demo operating next to other sensors while logging to sd card compa…
-
Can anyone help me figure out why my EBB2240 is displaying -93 degrees for my Hotend temp? Im using a Rapido hotend and i think its Pt1000. I have tried using these settings
sensor_type:MAX31865
…
-
The thermocouples on ultratronics aren't working for me. I tried selecting -3 and -1 for the temp sensor and both times i get abnormal constant temp values 20000 and 329.9. I'm using the latest dev ve…
-
Hello,
Where is the thermocouple type specified? Can you please show an example of how to read mV directly using the MAX31856 - (for non-supported thermocouple types, like Type-C)
-
Hi,
I'm the inventor of the [Solder Ninja Pen](https://www.crowdsupply.com/sitron-labs/solder-ninja-pen) and would love to provide backers of the project with the ability to use IronOS instead of t…
-
# Description of the Issue
It seems that for some reason when using CircuitPython firmware the thermocouple ADC takes far too long to collect temperature readings.
# Example of the Issue
-
Like many who are already using higher quality industrial sensors on their 3D printers.
This project was brought to my attention, as part of an ongoing effort to bring CAN Bus effectors to 3D print…
-
To which pins do i need to connect thermocouple boards and do i need to set other settings in the firmware except the ones below?
* -4 : thermocouple with AD8495
* -3 : thermocouple with M…
-
I am probably found a bug in thermocouple reading.
owread /uncached/3B.EB418803DC4C/thermocouple it returns 4.5625 but on reference thermocouple in multimeter is around 63°C.
Its connected like …
-
The data stream from the T100 will indicate if the thermocouple is disconnected to is measuring a voltage out of the thermocouple range. This should be handled gracefully in the commandline tool. The …