-
I have an SKR 2 Rev B board and it is burning up TMC2208 stepper drivers. It is consistently the E Motor and the Z2 Motor. Help!
I've gone through 6 BiQ/BTT branded TMC2208 steppers.
Hardware is …
-
Hi
I dont see AccelStepper.ino in TMC2208 example folder...
Any reason it will not work together, DIR pin mapping if used in UART mode?
Thanks
Daniel
-
Marlin bugfix-2.0.x
echo: Last Updated: 2022-06-01 | Author: (Alan Fereday, TMC2208)
echo: Compiled: Jun 3 2022
echo: Free Memory: 4249 PlannerBufferBytes: 1248
echo:V86 stored settings retrieve…
-
I am in the process of replacing my SKR 1.3 with a SKR 2. Even though I bought the card a few weeks ago I got a rev A board.
Anyway i did the jumper wire grounding so it should be usable. Flashed the…
-
A correction for the pressure advance calibration section: Klipper has patched TMC2208's incompatibility with its version of pressure advance including in standalone mode: https://github.com/Klipper3d…
-
The TMC-API is getting a rework of its core structure. This is to make the direct accessing of chip registers as easy as possible.
For detailed descriptions of how to use the updated TMC-API, see h…
-
**Application version**
Cura 4.3
Cura 4.2
**Platform**
Windows 10
**Printer**
Hephestos with SKR 1.3
X and Y: TMC2208
Z and Extruder: DRV8825
**Reproduction steps**
Just prin…
-
Hi again!
I've tested the TCM2209 component with a TMC2208 driver. This seems to work fine, although Im getting a lot of stalls whatever i do?
The IC detected is 0x20: [tmc2209:025]: Detected IC…
-
I am trying to configure marlin bugfix 2.0.0 ( both from bigtreetech github repo an marlin github repo ).
If I configure like this ;
#define X_DRIVER_TYPE TMC2208
#define Y_DRIVER_TYPE TMC2…
-
Hey guys,
i bought the components above from Bigtreetech and wired everything up.
Moving axis worked fine with manual gcodes, a short gcode file (only moves) worked as well.
Then i started my f…