-
Hi,
First TP-Link device for me. Ran the default installation. Reboot etc.
Homebridge logs don't throw any errors. It initializes the plugin it would seem.
But no devices magically appear in H…
-
### The problem
Hello - Can we please re-open this issue? after a power cycle of 6 plugs, the messages subside for a few hours but then reappear sporadically. No where near the volume previously,…
-
### The problem
Hi
Since last issues fixed on july release power info for this device is not updated correctly. It take a lot of time to be updated: now, last update is 22 hours ago.
more info:…
-
I would like configure ConsolePi to support Power Control with my PoE switch, by using Home Assistant as an intermediatary between ConsolePi and my Network Controller.
My existing Home Assistant …
-
I'd like to request an off on Idle feature (similar to TP-Link/Kasa feature).
-
### The problem
When I went through the Energy Dashboard, I noticed that the power consumption of the socket in a day is extremely high.
![Bild_2024-07-04_225541994](https://github.com/home-assistan…
-
via Kasa (TP-Link) or ?
-
Have KL400L5(US) flashing green/orange, ready to provision on a 192.168.1.0/24 network, can't see it with:
`kasa --type=lightstrip --target=192.168.1.255 discover
`
or (the recommended default …
-
There is an issue with the TP-Link Kasa 0.6.3 Addon and HS100 and HS110 devices which are on Hardware Version 4.1 and Firmware version 1.1.1.
These are likely to be brand new devices from the facto…
-
### Current Situation
Support for the new KP401 Kasa Smart WiFi Outdoor Plug
https://www.tp-link.com/us/home-networking/smart-plug/kp401/
### Proposed Change
Same functionnal support as the KP400.