-
Trex v3.05 can't output traffic to E810 NICs. Running exactly the same commands with 3.03 works fine. 3.04 has a similar issue, however there is a workaround: [#1110](https://github.com/cisco-system-t…
-
Hello everyone,
Currently I am working on Cisco cml and trying to configure Trex traffic generation. However, I am facing the problem in the picture below
![Capture](https://user-images.githubuser…
-
NIC info
[root@netqe03 v3.04]# lspci -s 0d:00.0 -vv
0d:00.0 Ethernet controller: Mellanox Technologies MT2910 Family [ConnectX-7]
Subsystem: Mellanox Technologies Device 0077
Control: I/O- Mem+…
-
Прикидываться Trexом
-
I wonder if it's possible to add support for the Slovak language so that it can scan all of our special characters (ĺ ľ š č ť ž ý á í é ú ä ô ó ň)?
If you accept contributions to translate TRex int…
-
Trex v.3.04 starts E810-CQDA2 without any error messages, however no data is being sent through the NIC.
Workaround:
- Start Trex v3.03
- Execute any test from the samples that involves the E810…
-
Hi,
Current trex-statless-gui delivered in 2019.
It's not compatible with the latest version of TRex.
The latest version of trex-java-sdk supports both old and the latest version of TRex.
Can yo…
-
Running Trex with 32 cores generates the following error message on my machine (Intel Xeon 8380 & E810 NIC):
```
Port 0 : *** core_mask: '0xffffffffffffffff' for 32 cores generates an empty set
Por…
-
以下是两个公开了ckpt的研究
https://github.com/UX-Decoder/Segment-Everything-Everywhere-All-At-Once
https://github.com/UX-Decoder/DINOv
期望利用这些模型,做到类似 [trex](https://trexlabel.com) 的效果
-
Hey everyone. I have tried and tried to get TREX to work with F2POOL but can't get it to work properly. Anyone have an example code they are using with F2Pool that is working?