-
Hi.
Great work on this.
Im trying to get this to work as intended. But my vario with e-kit isnt behaving as it should.
I cant choose mix 1/2. Only gas og full electricity.
How do i give some …
-
Hi,
I installed your software today following the readme file.
When starting the truma_service, I get the following output:
> andreas@raspberrypi:~ $ truma_service
2023-07-30 15:22:59,567 tru…
-
Hello, i get data for topic `service/truma/display_status` but `cp_plus_status` is always `waiting`.
I tried RESET at CP Plus, but no change.
Any idea ?
-
Hey guys,
i got a error when installing truma_service (after test it). I get the following error while installation (truma_service --install) running as pi user:
```pi@raspberrypi:~ $ truma_serv…
-
Hi, I connected it to my Alde instead of the Inet Box. The only thing I get in the Esphome Device Logger is: [truma_inetbox.LinBusProtocol:226] Multi package request BA.00.1F.00.1A.00.00.22.FF.FF.FF…
5of9 updated
3 months ago
-
I-Net-Box implementation with heater works fine.
When i connect the Saphir Compact AC the I-Net-Box crashes with the following error.
Hardware:
- cp plus = C4.03.00
- truma D6 e = H6.00.02
-…
-
Hallo Daniel,
ich komme da nicht wirklich weiter, bekomme nach jedem "Received status data from cp plus" die oben genannte warning.
System ist eine Truma, die auf Diesel läuft. Die Umschaltung übe…
-
It seems that there is not currently binary sensor to see if outside electricity/supply 230VAC is connected.
Although, it seems that OPERATING_STATUS changes from 5 to 7 when electricity is connect…
-
Hallo,
vielen Dank für die tolle Software und die damit verbundene Arbeit!
Leider habe ich ein kleines Problem. Meine Umgebung:
inetbox.py Version 0.3
Truma Combi D6E
CP Plus Bedienteil (iN…
-
Hiya.
It seems it is running and recognised by cp-plus but not reacting to the commands sent. On RPi4B, tried several uarts.
"mosquitto_sub -t service/truma/cp_plus_status" shows "waiting", after f…