-
Which pins are still free from the TFT in order to be connected to another SPI device? (example like cc1101)
-
It dosent work, DynamicJsonBuffer jsonBuffer(bufferSize);
-
Hello,
i can't connect to telnet.
The following i have done:
**import network
import machine
wlan = network.WLAN(network.STA_IF); wlan.active(True)
wlan.connect("xxxxx", "yyyyyy") # Connect…
-
Trying to run the _SDMMC_MJPEG_video_PCM_audio_dualSPI_multitask_ example on a TTGO T4 V1.3 board, I noticed that 'SD_MMC.begin("/sdcard", true)' pulls GPIO 4 down, although SD_MMC in1-bit mode doesn'…
-
is there anyway to know how many lights 1 hub can support without a problem?
i got many lights on 2 hubs, and lately i get unexpected behaviour. (light A turning on results in light B dimming, even a…
-
I have tried 6 different ways. I am trying to avoid sprintf, if possible and have some kind of conversion in the single line of code.
Here's my last attempt of the 6 ways I tried:
ofr.printf(ch…
-
### The problem
When adding the UART component for a Lolin C3 Mini board the firmware doesn't compile and throws an error. When removing the UART component from the YAML file it compiles correctly.…
-
### Operating System
ubuntu 20.04
### Version
v3.2
### Python Version
3
### Full Esptool Command Line that Was Run
python3 -m esptool --chip esp32 --port /dev/ttyUSB0 write_flash …
-
I just built up a new system with arduino IDE. I installed the latest boards and the latest TFT_Espi libraries. I took some code that worked perfectly before and now it does not write to the display c…
-
Please add latest version of RM67162 datasheet.
The readily available V0.5 does not show support for QSPI and the colour correction registers detailed do not have any effect.
Display dimming / b…