-
Has anyone been able to use this library (or any other) to establish a connection with a SX1262 to the TTN network?
Tom
-
Hi,
in your repos I noticed that you are working on a TTN/Helium-mapper for the T-Beam 1.2 with AXP2102 power management, [https://github.com/designer2k2/tbeam-lorawan-mapper]. Is there a chance tha…
-
If Basic Station MAC address contains zero, then Basic Station cannot make EUI from it.
As for example, if Basic Station has MAC address
"ether b8:17:eb:f4:05:d4",
then Basic Station make EUI fr…
-
I can't find a way to connect GW to TTN.
It is possible!?
How can i do that!?
-
Hello!
Does this end device code work with TTN V3? When I register, which version of LoRaWAN has to be placed?
thanks in advance.
-
Followup to #116:
- [ ] Replace `MatElem` and `QNArrElem` with [FillArrays.OneElement](https://juliaarrays.github.io/FillArrays.jl/stable/#FillArrays.OneElement).
- [ ] Rename `determine_val_type`…
-
After today's update I get this error back from the ImageOuput node when number_padding is set to "None":
```
Error occurred when executing ttN imageOutput:
unsupported operand type(s) for -: 'in…
-
Hello everyone,
I'm encountering an issue with my LoRa setup in the Australia region. Here's my setup:
Device: ESP32 with SX1262 Waveshare module
Gateway: Raspberry Pi 4 with SX1303 915MHz, usi…
-
TTN is rejecting many of the uplink messages because the field fcnt of the frame header is not incrementing between cycles.
The LoRaWAN spec states that it must be incremented for every message and…
aalku updated
2 months ago
-
Hi,
I am using my self created Lora Board using ESP32-S3 Microcontroller, HopeRF board RFM95W with SX1276 / 868 MHz and the latest master branch version of ttn-esp32.
Hardware: https://oshwlab.com/…
vrees updated
1 month ago