-
Import fails when the appliance registry_version = 8
https://github.com/GNS3/gns3-registry/blob/master/schemas/appliance_v8.json
It seems that the settings prop is not read.
-
Compiling a minimal hello-word UEFI application is easy. Setting up a productive development environment with a "run in QEMU" command and unit-tests is hard, however. Especially the last part is very …
-
I'm testing out Noir by using the UEFI bootloader route with EDK2, everything seems to work fine, I see the NoirVisor initialization at boot, and it says everything is successful and requests enter ke…
-
**The problem you're addressing (if any)**
Dasharo firmware currently is updated using flashrom. While it is a powerful tool that allows for a lot of customization, for end users it may be problema…
-
Hi,
Thank you all the developers for this amazing project.
I would like to use this project to install VM on a hardware during its early development stage to test applications. And I wish to be ab…
ghost updated
4 years ago
-
**System**
- Motherboard: Asus Z10PE-D16 WS - this is dual 2011-3 socket board on C612 PCH
- Two Xeon e5-2600v3 (haswell-e) installed
- 128GB RAM
- BIOS Version: 4101
- GPU: Intel Arc A770 1…
-
#### 1. Embedded C, ARM Assembly
#### 2. MCU ( Ardunio Uno, STM32F4XXX )
#### 3. OS Concept
#### 4. One CPUSS architecture ( ARM or RISC-V) [ As you are doing all the stuff for the cpu computation …
-
in order for nenuzhnix to be booted on real hardware a bootloader is required
for 0.1 release the requirements are the following:
- bootloader is not part of gnu project and doesn't have gnu req…
tpimh updated
3 years ago
-
During development of #302 tftp boots broke.
This caused the tests to hang, and never display the tftp failure panic.
I propose the following changes:
1. Add support for bootloader panic hander…
-
* [✓ ] I've searched the issue tracker and is pretty sure that there's no duplicate issue already filed
* [ ✓] I've built the latest development snapshot using the instructions in README and verified…