-
Hello. I think uf2 bootloader is good to flash. pls support uf2
-
I'm trying to get set up with the Arduino Nano RP2040 Connect board, but can't get the blinky example to work. I've tested that the Arduino IDE can program its own blinky example (so the board/LED de…
-
I have the dongle connected in DFU mode (the red led is blinking), I am able to read the device using nrf connect.
When using the urfutil I get this error:
```
PS C:\Users\carmi\Downloads\opensk>…
-
Flashing a uf2 firmware with only the `-bl uf2` flag in the command line causes the bootloader to overwrite itself.
Steps to reproduce:
1. firmware with `BOOTLOADER = stm32-dfu` in rules.mk
2. c…
-
I am looking at https://github.com/adafruit/tinyuf2/tree/master/ports/espressif
I want to use it to add a uf2 bootloader to my project.
Looking at the Adafruit Matrix S3, i can see how they do it wi…
-
I have a nRF52840 MDK USB Dongle with case, with UF2 bootloader.
It enters bootloader (press button + insert, but with fixed green led, not blinking red)
bootloader info on udisk says UF2 Bootload…
-
I watched the NetworkChuck video linked at the bottom of the page a few weeks ago, and i thought this project seemed incredibly cool. I ordered a pair of standard Pico boards because I was gonna make …
-
A Discord discussion led me to want the ability to have something like `CURRENT.UF2`, but contained both the current version of CircuitPython and the contents of the CP filesystem (`code.py`, `lib`, e…
-
I have an Adept Trackball that I ordered from Ploopy prebuilt. I have used VIA to configure it, but otherwise it has the stock firmware. I tried flashing it with the `.uf2` files in `firmwares/drag_sc…
-
Please, be aware that **T-TWR Plus** board _(both current V2.0 and upcoming V2.1)_ is already supported by Adafruit TinyUF2 bootloader:
1) https://github.com/adafruit/tinyuf2/tree/master/ports/esp…