-
Tried compiling some examples for Arduino R4 Wifi but it errors out. Same setup working for standart Uno. Any help on getting this library to work on R4 Wifi is appreciated. It seems likje every examp…
-
### Describe the problem
The upload operation for the [**UNO R4 WiFi**](https://docs.arduino.cc/hardware/uno-r4-wifi) follows this sequence:
1. Perform a ["1200 bps touch"](https://arduino.githu…
-
```
void fetchDeviceData() {
WiFiSSLClient ssl_client;
// Define GET url
const char* serverName = "xd6v8fwy40.execute-api.eu-north-1.amazonaws.com";
const char* resourcePath = "/prod?th…
-
as in the title. it connects just fine with the wifi but i get an error code -2 whenn running the wifiecho example on an arduino uno r4. it happens both on test.mosquitto.org and a local mosquitto…
-
A user is trying to compile WipperSnapper firmware for the Arduino Uno R4 WiFi, which fails due to two dependecies, one of which is SleepyDog library as it is an unsupported architecture.
https://g…
tyeth updated
7 months ago
-
I tested the following sketch using a TB6600 on the Arduino UNO R3, R4 Minima, and R4 WIFI. The R3 works perfectly, but the R4 boards do not. The motor attempts to turn but simply stutters. If I insta…
-
When attempting to upload the example connect sketch I get faced with a compilation error, the issue is discussed briefly in https://github.com/h2zero/NimBLE-Arduino/issues/622 and seems to be an issu…
-
Please support arduino r4 uno wifi!
-
code:
#include
#include "SSD1X06.h"
/* nRF24L01+ module connections
*
* module Arduino
* 1 GND ---- GND
* 2 VCC ---- 3.3V Note: 5V on VCC will destroy module (but other pins are 5…
-
```text
WARNING: library ArduinoRS485 claims to run on samd, mbed_portenta, mbed_opta architecture(s) and may be incompatible with your current board which runs on renesas_uno architecture(s).
WARNI…