-
-
### Board
ESP32 wt32-s3-wrover (wt32sc01 plus)
### Device Description
wt32sc01 plus
### Hardware Configuration
wt32sc01 plus
### Version
v3.0.1
### IDE Name
Platformio
### Operating System
…
-
Hello,
Is it possible to use USB Host via the USB C connector?
The esp spec seems to indicate it is possible but on the product sheet I only read CDC/JTAG.
If it is possible could you provide an e…
-
I tested this on a pico running MP 1.23 and the latest release of usb-device-cdc.
boot.py:
```python
import usb.device
from usb.device.cdc import CDCInterface
IFACE_TWO = CDCInterface()
IFAC…
-
**Describe the bug**
USB HS is not working with https://docs.zephyrproject.org/latest/boards/st/stm32h747i_disco/doc/index.html
CDC-ACM sample for example appears to fail silently somewhere after t…
-
Hey I wanted to ask if there is a way to hardwire a simple USB connection over the headers ? I can supply 5v and ground over the Ve and GND pins. From the Pinout sheet found at (https://resource.helte…
-
### The problem
ESP-IDF not handling the usb-cdc option.
Works with `type: arduino` just not `type: esp-idf`
### Which version of ESPHome has the issue?
DEV
### What type of installation are yo…
-
### Description
The CDC modeling in prim_cdc_rand_delay has a massive impact upon the ability of the usbdev IP block (specifically the logic in usb_fs_rx) to sample the input data correctly, whethe…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.5 on 2024-05-22; Adafruit Feather M4 Express with samd51j19
Board ID:feather_m4_express
```
### Code/REPL
```python
import…
-
First of all, I'm super impressed how flawlessly the script works without any fixed or adjustments, just start it and at the end there is a fully running Linux :exploding_head:
Thx a lot for provi…