-
Hello.
Following directions in other issues, I removed core 2.7.1 and installed your 0.0.3 .
The code I'm compiling is:
```
#include
#include
// Using GPIO2 as CS
Wiznet5500lwIP eth(2)…
NdK73 updated
4 years ago
-
Hi guys,
Is there any plans to support Dell 8FC8?
Thanks!
-
Hello,
I have a couple of setups with some cheaper USB controlled UPS with NUT and have sporadic nut-driver startup.
Sometimes after a reboot, nut-driver service won't start.
I've tried 4 differe…
-
```
`s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service base-addon-banner: starting
---------------------------…
-
Hi everyone,
I try to fork the project of @GauthamVarmaK to get the DVB tuner to work and add COMSKIP and network drive mapping in this project. I will be pleased to work with @dfigus too get this a…
-
Repurposing this issue for the discussion that it started. Was originally a question about connecting, and turned into a discussion about deciding the sensor data.
---
In the blog post, you ment…
-
OS: Proxmox 8.0.4 (based on Debian 12 with kernel 6.2.16-15-pve)
I just recently replaced my Prolink PRO1501SFCU 1500VA which worked fine on my Proxmox server (nut-server installed on the host) wit…
-
I have a few usb dongles/modems, all identical, and they got same vendor id & product id. How can I reset a single device under this condition?
-
Hello, I got this message when trying to run usb_resetter.py not as root :
```
Program failed with error Kernel path /sys/kernel/debug/usb/devices not found. Please run this script as root
Trac…
-
I have a CyperPower OR500LCDRM1U connected via USB to nut on Debian (proxmox). After some time (hours?), the connection to UPS is lost and the driver (nut-driver.service) becomes stale. This looke lik…