-
CH376 works on Raspberry Pico RP2040 using SPI, connecting also INT pin
I've tried with the UART (HW and SW) but the connection doesn't always work (to be better investigated why)
-
Hello! How can i flash this [NRF24L01 ](http://ali.pub/2w8xg) + [USB SPI CONVERTER](http://ali.pub/4p8to) with ArduinoISP or SPI programmer ?
http://www.elecfreaks.com/wiki/index.php?title=2.4G_Wirel…
-
Hi,
Thanks a lot for your code, Not sure if you are aware but it is in the PicoMEM :)
The PicoMEM use the SD in SPI and I just saw that "sdio_irq_handler" is linked and take 0x1d8 bytes in RAM (…
-
# ESP32-P4 support status in ESP-IDF
ESP-IDF v5.3, currently in development, will include initial support for the mass production version of the ESP32-P4 chip.
In the list below, supported featu…
-
Global FS support Flash and SD, now let's try to add USB Flash disk/key using SPI and CH376s Chip
This library looks very promising https://github.com/djuseeq/Ch376msc
e
Chip is using 3.3 by defa…
-
I'm having the same problem as an earlier user. My error message is slightly different though: `Invalid adxl345 id (got ff vs e5)`
I'm using Rampon v04 because my Klipper version is v0.12.0-289 (bu…
-
I'm trying to boot from usb hard drive via the newest spi flashed image on a rock64 cluster. It is working about half the time. Sometimes it detects the drive, sometimes it says it finds a device but …
-
Here is a copy of my config.txt file
```
GNU nano 7.2 config.txt
# Fo…
-
Is there value in a working list ?
Some ideas to start:
- [X] 2X text in menus. My aging eyesight isnt compatible with 0.96" displays!
- [X] Configurable display timeout. After 'n' seconds …
-
**Name of Board**
Adafruit FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C & Stemma QT
**Board Architecture (i.e: SAMD51, ESP32-S2, ESP32, ...)**
FT232H
**Hardware URL**
https…