-
Ich glaube mit `Mbps` können viele nichts anfangen. Glaube dass der alte Auswahl (DSL 6000, DSL16000, VDSL 50000, VDSL 100000) verständlicher ist.
-
I use the `curl "wttr.in/?format=3"` command on my Linux laptop.
For months, it has shown the correct location (Krumbach, Germany)—even after IP changes— but since maybe 1 or 2 weeks it constantly …
-
- [x] Grundlagen (Stromkreis, Spannung, Leistung, Stromkosten, Ladung, Energie, Watt, Volt, Ampere)
- [x] PC-Bauformen
- [x] BIOS und UEFI
- [x] Telefonanlagen
- [x] Kabelmodem
- [x] Virtualisier…
-
I'm using OpenMPTCProuter with three WAN connections:
- VDSL: about 50mbps/10mbps
- Starlink: about 150mbps/15mbps
- 4G: about 140mbps/20mbps
Both the router and the "VPS" end of the tunnel ar…
-
Might have to do with the way OSMDroid works,
but the map updates faster for me if keep on moving through the new unloaded tiles
if I stop touching the screen it can take a second or more
(50mbit VDS…
Djfe updated
10 years ago
-
Used Command:
`sudo python fritzcap.py --capture_files --decode_files --monitor_calls --box_name 192.168.178.1 --password xxx `
Output:
```
2020-09-15 19:56:30,552 - FritzCap version 2.3.1 start…
-
Hi,
I have a Proscent 180-T VDSL SFP module which has been working for 12 months on Openwrt 21.02.x in a Mikrotik RB760iGS (hEX S) router. The module does not support auto-negotiation and ships with …
-
My TP-Link Vr200v uses MT7610E for 5GHz. In Stock firmware range is good (signal should be 22dbm), in latest master it is very limited:
`Frequencies:
* 5180 MHz [36] (12.0 dBm)
* 5200 MHz [40…
-
```
Hello
I've just finished modyfing tpl-tool tool to add support TP-Link v2 header with
MD5 checksum update/checking. Now this tool has two versions support.
Succesfuly tested on my TD-W8968v1 …
-
```
Hello
I've just finished modyfing tpl-tool tool to add support TP-Link v2 header with
MD5 checksum update/checking. Now this tool has two versions support.
Succesfuly tested on my TD-W8968v1 …