-
Greetings,
I finished the installation of the ELS on my SB 10k Lathe and is working properly with just one issue and one questionable/possible issue.
The display panel, when within a few inches …
-
**Describe the bug**
SNTP処理中にSNTP要求を出すと、panicとなる。
**To Reproduce**
Steps to reproduce the behavior:
1. Go to WebIF TimeConf
2. SNTP switch OFF
3. SNTP switch ON.sntp reqest
4. Click on SNTP m…
-
```
What steps will reproduce the problem?
1. Once the box is booted, the display resets to 00:00 and counts upwards.
With the HDMU Image, if correctly resets itself to us the time from the Skin /
…
-
```
What steps will reproduce the problem?
1. Once the box is booted, the display resets to 00:00 and counts upwards.
With the HDMU Image, if correctly resets itself to us the time from the Skin /
…
-
```
What steps will reproduce the problem?
1. Once the box is booted, the display resets to 00:00 and counts upwards.
With the HDMU Image, if correctly resets itself to us the time from the Skin /
…
-
Hey, it's been a while since you touched this. I'm building my own VFD display using the same old/new nixie thing that you did. I have a question about your use of timers.
You used an internal hard…
-
Many Thanks for great software, i'm really like it. It;s not so hard to configure when you spend few hours on it 💃 ;) But in my case i have a little problem. Unwanted random characters displaying o…
-
Hello jcyfkimi
My VFD Display has 7 Digits and 13 Segments using the PT6312, mounted on a plate, even with the power supply (of a DVD Player) and I would like to use your clock sketch, so what should…
-
Hi,
I have a similar VFD display model (KD02906-1504) which seems to have similar connections and should be similarly easy to drive.
Your document mentions a serial connection (RS-232) - can you p…
-
Hello,
My apologies in advance for posting that here, but there is currently no luma.vfd ; luma.core seems to be the closest in the absence of as some kind of parent or umbrella project.
How wou…