-
### Board
M5Stack CoreS3
### Hardware Description
M5Stack CoreS3 with W5500 PoE Base
### IDE Name
VSCode with PlatFormIO 6.1.16b1
### Operating System
Linux
### Description
W5500 share the th…
-
Can I use W5500 module the same way as W5100 shield?
-
ESP32 with connected W5500 ethernet adapter, esp platform 3 compille error
```
C:\Users\j.jirutka\Documents\Arduino\libraries\WireGuard-ESP32\src\wireguardif.c:51:10: fatal error: tcpip_adapter.h: N…
-
### Port, board and/or hardware
W5500-EVB-PICO
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; W5500-EVB-Pico with RP2040
### Reproduction
Master Code running on a PC:
```
import s…
-
Hello to all
Hardware: ESP 32 + W 5500 Module
Software: PlatformIO + Visual Studio Code
Libraries used: WireGuard-ESP32.h + EthernetWebServer.h
You can see the above libraries in the following lin…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I have successfully compiled the w5500 network module for pyboard through the following command:
>make MICROPY_PY_WIZNET5K=5500
I have successfully compiled the firmware without w5500 module for B…
-
### The problem
I am trying to configure an [AZDelivery W5500 Ethernet module](https://www.amazon.co.uk/dp/B07CYVRMPL).
![Screenshot 2024-05-19 at 12 14 23](https://github.com/esphome/issues/as…
-
**Describe the question/query that you have**
Hi! I am searching for some guidance on how enabling/disabling certain transports for commissioning/communication at **runtime** should be implemented. A…
-
### The problem
W5500 can build without interrupt_pin configuration, but actually, ESPHome firmware will setup W5500 ethernet driver with uninitialized interrupt pin config. This cause infinite crash…