-
Hello,
Can I use the "WaveShare ESP32-S3 4.3inch Capacitive Touch Display Development Board 800x480" for ESP32-MiniWebRadio ?
An ESP32-S3 with 8MB RAM, TFT Touch, BT, SD card reader is installed h…
-
Hello
Will you please add support for the RP2040-PiZero?
https://www.waveshare.com/wiki/RP2040-PiZero
Thanks
-
Hi, I have Waveshare UPS HAT (D) and I have installed the latest version of this integration (downloaded from the master branch) in HA.
Using the `INA219.py` script from Waveshare, I'm getting prop…
-
I have a raspberry py 3B with "WaveShare CAN HAT For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN" (https://www.waveshare.com/rs485-can-hat-b.htm).
A Daly 7s 40A Smart BMS.
They are connected by RS485.
…
-
Hello, maybe there is an instruction for connecting waveshare somewhere? I have ‘bms rs485’ and ‘inverter rs485’
-
1. CM3I需要添加上
2. https://github.com/radxa-pkg/radxa-overlays/blob/main/arch/arm64/boot/dts/rockchip/overlays/rk3568-spi3-m0-cs0-waveshare35.dts 缺少B型号的支持
-
**Describe the bug**
Waveshare Lcdhat 240x240 dont work on jayofelony 2.8.9 version.
I tried aluminum-ice 1.8.5 and works fine on same hardware, using same configuration.
**To Reproduce**
Steps …
-
Please add in __init__.py support for a crystal oscillator running at 12Mhz.
I would like to use on a [WaveShare RP2040-PiZero](https://circuitpython.org/board/waveshare_rp2040_pizero/) with a [Wa…
srolf updated
3 weeks ago
-
Running current aluminumice on Pi zero 2 w, with waveshare v3. Bricks the screen every single time.
-
# Problem
I tried using this lib for the waveshare 1.54 V2 this did not work
## Things I noticed
After some trying I noticed that when ever writing data image in 4 Pin mode the chip select is…