-
Our kitchen use both channel 5 and 6 for the floor heating, but only channe 5 has a wall mounted controller/sensor.
This means that when using the Wavin components, all channels after 5, has the te…
-
Hi Peter,
Thanks for making the add-on for Wavin heating system! I have tried it today with OH3 and it works great except for the channel "ThermostatActive" which doesn't seem to exist. I do find the…
-
Hello,
Would it be possible to see in HA when system switched to cooling mode? Also to get additional info such as temperature of inlet water (thought this is not available on android app only on LCD…
-
### The problem
I have a custom component for a Wavin ahc 9000 floor heating system.
In ESPhome 2022.5 the component works just fine, but after update to 2022.6 it's no longer working.
When using…
-
Hello,
Is it possible to add Support for Eu-206-VFR? It is an expansion unit that have relays and could be used as basic switches.
Best regards,
Gintautas
-
Hi,
First, great job thusfar, seems to work great on my Sentio install. I noticed one thing you may want to avoid.
Most of my rooms have underfloor heating, are in manual mode and set to a stea…
-
In order to easily create a new process, the configuration should we exported from the old process, and imported into the new process.
-
I have an older nilan 300 EC unit with a CTS 600 board.
Did anyone have any luck connecting an esp8266 to this version of the nilan board ?
Obviously I've detached the wires going to the display…
-
I'm trying to install on the unit I purchased. I'm using the yaml from https://github.com/nic6911/ESP32_Modbus_Module/blob/main/esphome_example_code/WavinAHC9000V2_example.yaml but during compile, I g…
-
Hi, this is not an issue but I need help nonetheless.
I own a mechanical ventilation system by wavin. A RDCD 3.0 SH to be precise.
It has an RJ45 but it's not the classica LAN port. The device actua…