-
Hi
I have 19Mb/s transfer speed on ESP32 and ESP32-C6 but only 4Mb/s on ESP32-S2.
I suspect not enough RAM may be a problem. Can you enable PSRAM support for S2 ?
Soft: 7.1.1
Board: https://www.…
-
Hey, would it be possible to add more than one INA226 Board to the Wemos/ Software. I have 3 Batteries and i'd like to monitor them by 1 Wemos. Is there any possibility to implement it?
-
I have "Wemos D1 mini" board , one of esp8266 boards. I downloaded the firmware to the board then it didn't work any more and when I tried to see the debug logs from the problematic board using terate…
-
**Describe the problem you have/What new integration you would like**
The 8x8 matrix LED Shield for the wemos D1 mini platform should be supported by esphome. This is a cheap device targeted a…
-
Hi, thanks for this fun project! I've just built some rev. 4 boards. And I'm testing with two WeMos D1 R2 boards and an Arduino Uno. For all boards the power supply test, interfaces test and self-test…
-
### The problem
![image](https://user-images.githubusercontent.com/16019127/189438609-241210b9-a806-484c-bbb7-44c2b3ea2063.png)
![image](https://user-images.githubusercontent.com/16019127/189439…
-
I download the code to Wemos D1-mini board, get the wrong log in serial port as follows:
;$\0l恟$鈔?l?b|帎抮b?b騨nlnnbbpp?blrl
Can someone help me to solve this problem?
thanks!
-
Hi,
My air conditioning(SRK35SW-Z) is not responding, the device appears in homeassistant etc but all sensensors have the value state unknown. I'm using the following [board()](https://www.nodo-s…
-
Hi!
**I'm new here**, trying to set your **great** Stino under Sublime Text v3.0, Build 3143, and I want to report an error when selecting **sketchbook -> espressif esp32 board**. The error is:
"Err…
-
Hello
This wiring is SPI, but after uploading the ReadTag.ino code, the message "Didn't find PN53x board" is displayed.
My Board :
`Wemos D1 Mini`
My Wiring :
```
SCK => D5
MISO => D6
MOS…