-
As mentioned at http://wiringpi.com/wiringpi-deprecated/, wiringpi is discontinued.
It would be nice to take any other GPIO lib.
-
```
>>> import wiringpi as w
>>> w.wiringPiSetup()
Unable to determine hardware version. I see: Hardware : sun8i
,
- expecting BCM2708, BCM2709 or BCM2835.
If this is a genuine Raspberry Pi t…
-
The setup.sh script fails when it is fetching wiringpi.
Given that wiringpi will soon be [deprecated](http://wiringpi.com/wiringpi-deprecated/), and the git repo currently inaccessible:
> git.drog…
-
So I ran into a problem when setting up two new rpi 4b’s.
After installing bookworm (first trying 64bit and then 32bit) and installing WiringPi, the following error pops up after running gpio -v:
…
-
Wiringpi2 is deprecated in python3.3+, but the calls are the same in wiringpi (no 2) so I've attempted to remove the 2 and utilize the working module in python 3.5
However I cannot seem to get my b…
-
The opencv4_pi branch is listed as having been fully merged, but the seek_viewer_fb example was not transferred. I may want to copy it over and wrap it in an `#ifdef wiringpi` block.
-
is the wiringPi.h file missing. I'm getting the error below.
@raspberrypi:~/LagBox/src $ make
mkdir ../bin
gcc -Wall -c inputLatencyMeasureTool.c -o ../bin/inputLatencyMeasureTool.o -std=gnu99
…
-
I built this package and I see it get compiled and installed (I did a "sudo ./build" to get rid of permission errors), but when I go to run, I get errors that the commands such as digitalWrite, or wir…
-
bug附近的代码
```C
if ((pin < 0) || (pin > 63))
return wiringPiFailure (WPI_FATAL, "wiringPiISR: pin must be 0-63 (%d)\n", pin) ;
/**/ if (wiringPiMode == WPI_MODE_UNINITIALISED)
return wi…
-
Hi, I have an issue I want to use a python script to setup three pins for interrupt input but seem to fail already in the beginning. Also just out of curiosity is there no possibility to have the debo…