-
*ZeroChaos-:*
In file lib/netifd/netifd-wireless.sh the following code is found:
# Examples:
# psk-mixed/tkip => WPA1+2 PSK, TKIP
# wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP
#…
-
首先感谢作者付出，近期路由配置过后无法连接wifi 问题估计出在 wifi加密模式 以前是wpa/wpa2 更改为wpa3/wpa2 后就无法连接了 wifi灯闪烁
-
**Printer type** - [MK4]
**Printer firmware version** - [6.0.0-RC1]
**Original or Custom firmware** - [Original]
**Optional upgrades** - [none]
**Describe the bug**
After updating to 6.…
-
Awesome work on Gentoo for the Pi 4!
I had issues connecting to WiFi where the Pi4 could see SSIDs but would never associate. It wasn't until I went into Advanced networking that I realized the Pi4…
-
Cool features ideas:
* Ethernet interface speed info (1 gigabit, 10 gigabit) & Wi-Fi version (Wi-Fi 4, Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E, Wi-Fi 7).
* Wi-Fi security type (WPA2, WPA3, WPA-Enterprise, etc)…
-
**Is your feature request related to a problem? Please describe.**
I am trying to connect the openBot to a local wifi network so that i can fetch parameters from different sensors , pins and send the…
-
### Knulli build version
40-dev-d3b520f949 2024/07/21
### Your architecture
RG35XX H
### Issue description
If I connect to a wifi signal where the password is all numbers, it connects and picks u…
-
*sljansen:*
I did an upgrade on a WRT1900acs v2 router (my backup router) that was running 18.06.4 (I think) via LuCI using the image "openwrt-19.07.0-rc1-mvebu-cortexa9-linksys_wrt1900acs-squashfs-s…
-
_EDIT: If you want to skip the noise / TL;DR, see [my comment](https://github.com/RPi-Distro/firmware-nonfree/issues/34#issuecomment-1378760628) at the bottom. The culprit here is SWSUP (authenticati…
-
Hello,
I finally managed to get OpenBK installen on my BK7231N smart socket.
I was also able to get the module configered, so that Relay, LED, pbutton and power measuring work.
But unfortunately I…