-
I'm getting ready to do a bunch of work to avoid running my application as sudo (pigpio bit banging stuff). But, I also need to control LED strips using the ws2811 library. So, maybe I need to incl…
-
Hi, I want to run simple project using Arduino Due and WS2811 LED strip 12V (1 segment = 3 LED) and im just not able to make it. No example program works for me, even if compilation ends with no error…
-
Hello,
after a longer time I upgraded the FastLED library within my project. It consists of several external libraries including:
* FastLED
* ESPAsyncWebserver
* ESP8266
* 100x WS2811 LEDs
W…
-
Hello,
I'm using this code to run some ws2812B strips but due to the voltage drop of the 5V Strips I'm trying to use the 12V ws2811 for larger distances. Its works with this ESP Easy module as well…
-
I received a shipment of Worldsemi WS2811 LED strings and noticed a marked difference in low-level illumination in some of the strings. This was traced to different chip batches which were unknowingl…
-
**Describe the bug**
Many vendors are now selling GS1903 based strings rather than WS2811 chipsets. They claim these are fully compatible but the timings are different and the margins tighter. This o…
-
I did installed the library as described in the README by doing
```mkdir build
cd build
cmake -D BUILD_SHARED=ON -D BUILD_TEST=OFF ..
cmake --build .
sudo make install
==> It says:
[100…
-
Hi Aaron ,
I'm trying to scrolling some words but when i upload the code ; code does not show properly on my matrix . LEDs are working randomly , examples of matrixs are not working same proble…
-
Hey I can provide translation to French.
In the past I managed to make WS2811 work flawlessly with your app.
It is still working like a charm !
I will try to make the V2 work with WS2811 again…
-
I'm using rpi-ws281x 5.0.0 on an RPi 3b with Raspbian GNU/Linux 11. My Python program does not use any other native libraries besides this one. In my app, I'm using 2 PWM channels (GPIO 18 and 19) and…