-
Would it be possible, to (optionally / having a checkbox) remember drive power according to selected mode?
Sometimes I use 80-100% drive power for SSB, and max. 50% for FT8, depending on the band wit…
-
Hi!
LOVE this initiative! Thanks for all your hard work guys!
I am using WSJT-X and it works. How ever the decoding is slow causing the decoding part to lag into the TX part, especially when there´s…
-
He compilado y cargado el HEX con éxito en un 328p, el programa muestra ubicado en examples/Si5351JTDemo sin embargo al no tener forma de interactuar, con el programa (ni salida serial), no estoy segu…
-
**Describe the bug**
When a SNR is used for the RST, like in WSJT modes (FT8), Simple Fast Log Entry does not recognize this and uses the default RST for CW, RTTY, PSK. The wrong default for WSJT is …
-
I'd like to be able to use fldigi or wsjt-x with my SDR. These programs support hamlib, and I can get them to control the SoftRock directly (set frequency, tx/rx, etc) and run a trivial gnuradio progr…
-
Recent upgrade from Github show a "Rig Control" Menu.
As can I see, it is for control a rig from CubicSDR, used as panadapter or receiver only when using also a transmitter able to be controlled by H…
-
**Describe the bug**
The simple fast log entry documentation states that for WSJT modes the default signal report should be -10. Cloudlog is setting this to 599. This is from the simple fast log en…
-
Interesting script! There appears to be a 0.2-0.3s lag in the audio, CPU utilization is good, but the lag is enough to make my WSJT-X stop decoding any messages.
Any ideas?
![image](https://git…
-
Any chance getting JS8call logging support like there is with WSJT-X in klog?
-
I have been using WSJT-Z for a while now. It has some very good features that can assist with off grid operations. For example filtering, can limit the stations that you see on a small screen or allow…