-
When trying the library with a '3D magnetic sensor 2GO' board, with example 'Cartasian_low_power' is always shows this in serial monitor:
![image](https://user-images.githubusercontent.com/18257076…
-
I follow all the procedures to configure the Arduino.
However, arduino indicate that the XMC 1100 is not in the COM.
![图片](https://user-images.githubusercontent.com/86290164/122892349-e450c680-d377-…
-
### Prerequisites
_Can you reproduce the problem reliably?_
**yes**
_Did you check current release notes for known issues?_
Where can I find those?
_If this is not the latest release, h…
-
Hello developers,
can you please add support for the Infineon XMC 2Go. Sketches will upload but nothing happens.
Thanks
-
> Which XMC board are you using
XMC 2Go-V1
> Which version of XMC-for-Arduino are you using
1.5.0
> Which version of Arduino IDE and platform you are using
1.8.13
> Does this happen …
-
I am developing a MIDI controller in which I have hundreds of SysEx strings to be triggered to control a Korg synthesizer, and when I saw the possibility of using a PS / 2 keyboard it became a reality…
-
I'm having problems reading the analog pins on an XMC4700.
A. XMC4700 Relax Kit for 5V Shields
B. Lib Version 1.5.0
C. Arduino IDE Version 1.8.13
D. No extra lib, Hardware: 100k Potentiometer
…
-
I am testing XMC 2Go with IM69D130 Shield2Go with these sample code (https://github.com/Infineon/IM69D130-Microphone-Shield2Go/tree/master/examples)
Since the microphone Shield2Go uses I2S interface,…
-
Hi All,
I tried more example code especially IFX9201 motor control but it is not working.
Does not work at all or do I have the problem?
Thank You!
Attila
-
In source code, the Serial.println( "***" ) instructions seem not transmit data on USB port (i.e. COM Serial Port).
Can you confirm?
Thanks, Tony.