-
A few simple examples or step by step instructions would be wonderful:
1. How to read and existing card and dump the data to a file (READER)?
2. How to take a dump and upload it to a virtual card 1-8?…
-
Hi everyone,
please here on this website + in manual unfortunately I cannot find any solution regard
**"How to CREATE DUMP + DOWNLOAD it through TeraTera + how to UPLOAD it"**
Please, can some…
-
A D-LINK DPN-100 also has an RTL9601C1, I put the pictures above and below the SFP module board for you.
I wanted to try to flash with firmware V2801F but squashfs-tools (extract / repack rootfs) and…
-
Good to see added XMODEM variants in tio 2.8 ref: #236
Concerned about the insertion of a menu into UX workflow. Put simply it is annoying to add an extra step to the existing workflow for a very c…
-
Hello,
I would like to modify the USB Transfer size on the FTDI driver.
Would you know the params to use in the mConnection.controlTransfer() command.
Regards.
FG
-
I'm running Tio version: v2.7, installed from the non-git package on the AUR using YAY. At the time of writing this I have the latest kernel for Arch Linux (6.5.8-arch1-1) and the rest of my packages …
-
My new mkr nb 1500 cannot send sms is not working. But if the number to send the sms to has previously sent a message to the mkr 1500 than it works. It seems that the mkr 1500 remembers the path or s…
-
### Describe the bug
i have 22.03.02 running on a sd. i was using 21.xx and updated with luci to 22.03.02. i usually create my own images.
i now wanted to create a new image but flash that with dd…
-
Hi,
I tried with a 24v inverter from easun which however is identical to the 2424MSE1 of MPP solar looking at the esphome log I see that it sends something but receives nothing I also checked the wir…
-
When executing `SET THROTTLE x/y`, pressing ^E character on the console **does not** stop the simulator:
- #### the output of "sim> SHOW VERSION" while running the simulator which is ha…