-
### The problem
Ever since updating to 2024.8.x my Yamaha amplifiers create duplicate entities after every few HA restarts:
![Screenshot 2024-08-14 at 18-10-37 Settings – Home Assistant](https://g…
-
### Feedback
media_player.select_scene nor yamaha.select_scene are no longer recognized
### URL
https://www.home-assistant.io/integrations/yamaha/
### Version
2024.8.1
### Additional information…
-
**To Reproduce**
Steps to reproduce the behavior:
1. Receiver is switched on and network is connected
2. start adapter (or is already running)
3. error-message every 30s in log (see screenshot) …
-
### The problem
Very similar to what's been described in #79148: actions from Home Assistant to MusicCast devices are virtually instant, but getting the state changes (either from HA or from the Musi…
-
The card was working fine until a recent change in HA. For the A-receiver entity I had selected a Yamaha receiver that is provided by the HA Yamaha Receivers integration. The card stopped working. I d…
-
Hi, I have a Yamaha Rio3224-D2 and when I list channels, the list stops at RX channel 16 and there are 24. As a result, I can't issue commands to the channels that netaudio doesn't see.
Suggestion…
-
great project! Been testing with a few people and have not been able to get anyone on that has one of the Yamaha MG-XU usb mixers -- eg the MG10XU and 16. This happened with both the Yamaha/Steinberg …
-
### The problem
I tried to enable the Yamaha Network Receivers integration, but it does not start and is not shown under _Settings > Devices & services_.
I have two receivers, one RX-V585 which is…
-
### The problem
Logger: homeassistant.util.loop
Source: util/loop.py:77
First occurred: 7:19:20 PM (1 occurrences)
Last logged: 7:19:20 PM
Detected blocking call to import_module with args ('ho…
-