-
-
### Operating System
Linux
### Board
Custom ESP32 S3
### Firmware
My own, but this is not relevant - will explain below
### What happened ?
The new USB NCM driver - introduced in #2227 - is cau…
-
In SEGGER_RTT_Conf.h
```
// Up-channel 0: RTT
// Up-channel 1: SystemView
//
#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS
#define SEGGER_RTT_MAX_NUM_UP_BUFFERS (3) // Max. number of…
-
**Describe the bug**
Flashing a progream with `cargo embed` or `probe-rs download` fails on metro_m0. The same program succeeds when flashing via openocd:
```
% cat memory.x
MEMORY
{
/* same…
-
When using (ya)picoprobe to program an NXP i.MX RT1010EVK, I get an "Unexpected ACK value (5)" with yapicoprobe v1.14.
Instead using LPC-Link2 (with DAPLink FW), JLink Pro (Segger FW) as SWD probes…
-
Hello, I am the submitter of [](https://github.com/probe-rs/probe-rs/issues/1757). After seeing your test, I would like to conduct a test with yapicoprobe. My target chip is STM32H743VGT6, and the ver…
-
**Describe the bug**
YaPicoprobe shows weird behavior if shared RTT access is enabled. Investigating this a little bit further showed, that the CMSIS-DAPv2 timeout must be very short, because disabl…
rgrr updated
9 months ago
-
`v1.18` rsp. `v1.19-pre` (other version not tested) seems not work with the latest probe-rs https://github.com/probe-rs/probe-rs.
The error cause mentioned is mostly:
```
Error: Failed to open th…
-
### Operating System
Windows 11
### Board
MIMXRT11XX
### Firmware
My project use the tinyusb repository a068b81674e8b47d6fb78ab6a06abb7decc2e644, refer to examples/device/net_lwip_webserver.
##…
-
I got a new patch of rp2040 (03-22). After flashing FW it does not boot at all( No LED flashing, no usb emulation). That FW is running fine on older RP2040 (04-20).
Rebuild the FW with lower CPU cl…
phb98 updated
9 months ago