-
## ath9k
(Maybe this applies to other chipsets using minstrel in kernel as well).
### RX Statistics:
```
# cat /sys/kernel/debug/ieee80211/phy0/netdev:client0/stations/4c\:dd\:31\:74\:08\:04/nod…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
* [x ] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A：刷新最新固件后，开始时2.4g和5g无线网络使用正常，但经过一段时间后，2.4g无线就无法搜索，只剩5g无线网络可以连接，请问这是无线驱动的原因，还是硬件出问题了？…
-
*Rampler:*
With ATH79 the WAN LED is missing on my Archer C7 V2
Using Openwrt 21.02.0.
root@Repeater_WZ:~# ls /sys/class/leds
ath10k-phy0 tp-link:green:system tp-link:green:wlan2g
…
-
I am trying to work
Kismet for educational reasons. I use in Ubuntu 20.04.1 LTS but when i When I start it, i I cannot see the wifi networks. Can anyone help me?
![Screenshot from 2020-09-24 14…
-
Looks like it is not possible to set fragmentation threshold for current ath10k-ct
Software (Openwrt 18.06, 10.1-ct-8x-__fH-021-46482de, kver=4.16)
Hardware (UBNT, unifi ap ac lite)
LOGS:
r…
-
Hello @greearb
I am testing the commit 13319ff0b5dc3c86e8313f49fca583b829878736 for one week.
My router (Arcer C60 V2, QCA9886) became instable after install this commit.
On clients side, the co…
-
I have successfully built the USB driver on Ubuntu 16.04 and the `Managed` mode is working fine. I'm using the Linksys WUSB6100m with the `QCA9377` chipet. But there is a slight issue.
When you bri…
-
*real-t0mg:*
Running OpenWRT 19.07 on TP-LINK Archer C7 v5 with Candela Technologies firmware ath10k-firmware-qca988x-ct - 2019-10-03-d622d160-1 causes AP to crash, stalling all connections.
This…
-
Hi,
Sorry to ask, is this for only android ?
Can we compile this driver for Linux (sdm845 soc)
Plz help.
-
### Describe the bug
I am using a self compiled OpenWRT 23.05.4 on Gl.iNet E750v2 with the `EM060K-GL` modem.
I noticed that there was no wwan interface or `/dev/cdc-wdm0` device file but I fixe…