-
Trip: Tesla Factory, [83bnxru6ux2ri9fhgw6nw]
This is an edge case, but worth resolving.
If I create a single-segment round trip, EVTO decides the waypoint order for me, regardless of the order i…
-
Hi Robert, now I ran the autorouting and again after some time (an hour or so) my CPU became idle, so I checked the autorouter status. It was not finished yet, but there were no incompletes. However t…
-
As you can see,
![broken-bumps](https://cloud.githubusercontent.com/assets/211644/11787935/fd7e4b38-a253-11e5-9c39-0e0bae23893d.png), the bumps are not being placed correctly.
---
Chromium Version 4…
-
After Autorouting and when attempting to modify routes by bending a green glowing circle appears at each bend. I thought was normal since this was my first use. I went to OSH Park to submit my PCB and…
-
Hello,
Breadboard view and connections are ok, but when autorouting in schematics it is making unwanted connections. Also, it crashes when auto routing in PCB view.
Regards,
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on July 09, 2012 04:05:20_
Sometimes removecorners is either removing a corner it shouldn't or is creating a zero-length t…
-
The DynamicRouter has the possibility to call different controllers and template by class or type, but for AutoRouting it doesn't work because the Route Documents are all of the same type. This doesn'…
awdng updated
9 years ago
-
```
in v0.7.1 (b5908 2012-03-10) [Qt4.8.0] selecting custom auto-routing and
setting sized to 11 mils all traces shown/drawn in program show in Inspector as
0 mils
same thing happens with all trace…
-
```
after (or maybe during) autorouting, remove redundant wire loops
```
Original issue reported on code.google.com by `irasc...@gmail.com` on 14 Nov 2008 at 10:19
-
```
in v0.7.1 (b5908 2012-03-10) [Qt4.8.0] selecting custom auto-routing and
setting sized to 11 mils all traces shown/drawn in program show in Inspector as
0 mils
same thing happens with all trace…