-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Since https://github.com/MarlinFirmware/Marlin/commit/94e9f26544d77d22c67a8973a4b480411ecfe7d…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
In certain circonstances, the printing head crashes after a Bed Leveling followed by a Store …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
For some reason after updating to 2.1.2.2 the accuracy of my BLtouch went completely do…
-
I m trying to set the offset of the Bl touch , but Skr mini E3 dont save it to memory (M851 Z-0.9 and m500), after i restart the printer, m851 is Z0.00 , for the moment i have put the offset value i…
-
Hello,
Same problem here, I managed to compile a firmware with platformio since marlin bugfix 2.0.
I put firmware.bin on my SD card and she installed marlin.
Now I just installed a bltouch so…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
see screenshot
![CleanShot 2024-07-10 at 19 03 49@2x](https://github.com/MarlinFirmware/M…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I had a small misconfiguration that exposed the bug.
#define Z_CLEARANCE_DEPLOY_PROBE 5
T…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Having installed a new, original E3D Revo 12v hotend I ran M306 and got the below values:
…
Drzet updated
1 month ago
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I am using a MKS H43 with the creality 4.2.7 board.
Everything is working fine. I get the st…