-
# Library Repackaging Progress
This is an overview of our Python going concerns. Not all of these may need repackaging or be possible to repackage, and some of them might work with Pi 5 / Bookworm …
-
Why use i2c-bus versus i2c? You mention this in the read me, usage text. Just wondering why you did it?
-
I am using 8 M5stacks as esprecense devices and like to add the M5Stack ENV III sensor for temperature and humidity reporting.
is this sensor supported?
thanks
Rien
-
No matter what I do, I can't get the example of the ds1307 to run. always gives me the following:
[...]
V (13) intr_alloc: esp_intr_alloc_intrstatus (cpu 0): checking args
V (13) intr_alloc: esp_…
-
#### Description
I would like to use the ABP2 series pressure sensors. This series covers a wide range of sensors, but they all share a common software interface, leveraging the driver code.
The…
dpcrd updated
7 months ago
-
BME680 what is the pin out to connect it to the flipper zero?
-
The list command as defined right now only provides useful output if it finds out of date modules. If I want to see the list of installed modules and what versions they are, that isn't available. Usin…
-
bonjour voici une liste avec les derniers ships intégrés.
```
case 0x00: Serial.print(F("AS3935")); break;
case 0x01: Serial.print(F("AS3935")); break;
case 0x02: Serial.print(F("AS3935")); break;…
-
### The problem
When using wifi details sensors on the RPi Pico 2040W board, the information reported is invalid and causes board reboots.
1) When using the wifi signal module, the following is …
-
Create a preprocessor script to enumerate the arduino libaries and their versions into a string. The string should be placed into a header file. The header file is then included in the firmware, compi…