-
There is some serial device that reads the fuel level of the main fuel tanks at site. This needs an Agent written for it. The start of some driver code has been written, get in touch for details if yo…
-
As I understand RicinoNext is both hardware (transponders+interface) and software(lap counter/timing software) solutions. Right?
If so, can RicinoNext lap counter software be used with Robitronic U…
-
What I did: Installed Pymakr extension on VS-Code, successful connected to device on COM8, able to access device, upload and download files.
Trying to use CTRL+SHIFT+S to store files easier to the de…
-
Hi
I'm new to using platformio but am struggling to upload to an esp-wrover-kit board. I've updated the board on the esp32 profile to esp-wrover-kit and I can see my device being detected on COM13.…
-
The second picture is very informative, thanks for it.
What is the uart pin assignment? What are the serial line parameters?
Thanks.
-
The USART always sent gibberish even after trying many baudrates and parities.
I adapted the boards.txt and platform.txt to allow using a USB to serial adapter while waiting for a new ST-Link. The …
-
When running the example, the USB hotplugging (thus detection when a device would be removed) does not work. Any solution to this?
-
What is the issue with Tinybee USB.
I see from other posts with people with the same problem. The USB appears not to work to the computer and thus I can not flash / program the board.
What is the so…
-
**硬件设计方面**
1、MCU换成esp32 c 系列 ESP32-C3FH4 (极客版)https://github.com/cgrrty/T12-PD-SolderingPen/issues/4#issue-1025986130
下一个版本可以考虑 树莓派pico的芯片方案 (创客版)
2、屏幕换成ST7735 0.96寸 与原0.96寸 SH1107 尺寸大致相同;
…
-
#### Description
The SONiC couldn't load the USB console switch, no `ttyUSB*` device created under `/dev` directory.
#### Steps to reproduce the issue:
Suddenly happens on our testbed, not …