-
Ever since I installed Community FW around 1.5 years ago, if the machine runs out of filament and is stopped by the runout sensor, then sits idle for 30 minutes or more, the hot-end heating element wi…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Trying to get the DWIN DMT48270C043_06WT LCD to work with the BTT SKR 3 or SKR mini e3 v3 on …
-
I'm aware that there was a discussion about this and that it was decided that 0.25 steps should be enough for most people. It must be the cold weather but I find myself using babystepping a lot these …
-
For safety, there should be an Emergency Stop button on every screen, which triggers an immediate M112 shutdown.
Is there a way to command M112 from the UI?
-
### Discussed in https://github.com/Thinkersbluff/DGUS-Reloaded_for_CR6-DWIN-SET_Component/discussions/15
Originally posted by **blondsign** February 2, 2023
Hi there I got following error me…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Compiling Marlin with modified Ender 6 configuration (selecting **DGUS_LCD_UI_RELOADED** inst…
-
I believe this function did once work, but I never change the value so I did not notice when in the evolution that it stopped working. I discovered it no longer works when I tried to add it to the Tu…
-
### Configuration
**Operating system**:UBUNTU 22.04 LTS and Python 3.10.6
**PlatformIO Version** (`platformio --version`):6.1.6
### Description of problem
Try to compile Marlin firmware 2.1.…
-
I have looked at the wiki and this is indeed a bug. I am using the mega s.
When following the wiki tutorial of how to install a bl touch it instructs you to lower the bl touch till it hits the bed,…
-
I tried to install the scripts on an Ender 6 with a Hemera XS modificatation. The base setup is from 3dprintingforbeginners. I get the following error, after starting the firmware:
```
gcode command…