-
i cant install nvidia-dkms 525.89.02
log say
`==> dkms install --no-depmod nvidia/525.89.02 -k 6.2.6-zen1-1-zen
Error! Bad return status for module build on kernel: 6.2.6-zen1-1-zen (x86_64)
Co…
-
**Description**
Observed that some kernel modules are not being loaded in the latest kernel `5.15.34-v7`.
So I have built a `core-image-base` with the tip of the master (`0135a02`) and while t…
-
With hardknott xcsoar-image-testing fails to compile sensord-testing.
xcsoar-image btibake target is fine.
```bash
Build Configuration:
BB_VERSION = "1.50.0"
BUILD_SYS =…
-
### The problem
When a 1wire sensor disappears from the bus, e.g. because of a long and unreliable connection, because of a defective wire or some sort of maintenance, the device is automatically del…
-
Hi all,
Sorry if it's a bit off topic but haven't found an answer via the usual search methods. Trying to use owserver to write the eprom memory on a DS2406. We have a circuit that can pulse the 1-…
-
I´m not sure if it is the right place for the Problem:
I use 3x SC16is752 devices on a Pi 4 with buster (4.19.75-v7l+ #1270)
All 3 devices works if I only use 1 or 2 of them:
In config.txt:
works…
-
### background information
I have a product (a thermometer) with 1-wire network of DS18B20 sensors, based on NodeMCU firmware that was originally built on 2016-05-28 from the dev branch. It worked we…
-
OWFS has stopped working after FC33 upgrade. I use either owfs-3.2p4 or owfs-3.1p4, but it gives the same result shown below, i.e. it cannot recognize three USB sensors as before. What has gone missin…
-
Hello,
I've connected 2 DS2438 Sensors to my DS2482 Module and connected it to my FHEM installation.
For the integrated temperature sensors, I get 1 Entry for each of the 2 DS2438, but for the va…
-
Battery Status does not work as described with Microsoft Laptop Go running Debian Sid
According to the Feature Matrix (https://github.com/linux-surface/linux-surface/wiki/Supported-Devices-and-Feat…