-
### The problem
The Sensor Component VL53L0X Time Of Flight Distance Sensor doesn't work when the esp-idf framework is used, but works under Arduino framework.
There are no errors, it just doesn't g…
-
### Details about Problem
**Target:** ESP32-S2
### Description
All current images for ESP32-S2 are using the internal USB CDC for Wire Protocol.
Several modules out there have an external s…
-
Hi!
I have just received my new PTS200 soldering iron. It also supports TS100 soldering tips, it has buttons, display, accelerometer, USB PD and QC support, and an open soucre firmware. It is so si…
-
**Name of Board**
ESP32-S3-WROOM-1 Dev Board - 8MB Flash
**Board Architecture (i.e: SAMD51, ESP32-S2, ESP32, ...)**
ESP32
**Hardware URL**
https://www.espressif.com/en/products/devkits/esp32-…
-
### Hardware
ESP32-C3
### Firmware version
v2.4.6
### Application version
v.2.4.6
### What happened? What did you expect to happen?
I successfully built a device using a WROOM ESP S2 and a CC11…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Board
ESP32, ESP32-S2, ESP32-C3
### Description
The platforms.txt has the option -mlongcalls missing for assembler input files:
compiler.S.flags.esp32=**-mlongcalls** -ffunction-sections …
-
### The problem
DAC function is not available for ESP32S2 modules. Internal DAC pins for ESP32S2 are GPIO17 and GPIO18 but esphome allows pins GPIO25 and GPIO26.
Am I doing something wrong, is t…
-
I'm using an ESP32-S2 and I'm trying to set up an RMT channel to output for an IR transmitter and also utilize the FastLED library.
Because FastLED uses the RMT, I've been running into a few issues…
-
@SuGlider I've now tested ESP32 Arduino 2.0.3 with a number of ESP32 boards, using a benchmark that involves uploading a program of about 1400 characters to my uLisp interpreter and then running it. T…