-
### Enhancement summary
Each leaf MLAG pair in an AVD based evpn vxlan fabric gets an iBGP transfer VLAN and network configured for each vrf.
The values for this are entered globally and per fabri…
-
When clear the bgp evpn neighbor, then the vxlan evpn type3 routes would be deleted. And vlan member of tunnel bridge port was deleted and lead to flush fdb entries by vlan and tunnel bridgeport. But …
-
#830 changed the way global VRF data is merged with node VRF data. The node VRF data structures contain just parts of global VRF data during most of the transformation process, which means that some o…
-
Hello -
I notice a behavior that with evpn and no multihoming, if an ARP entry is present in 'ip neigh' table (even though it is STALE) it is advertised to the peer evpn bgp neighbors. This behavior …
-
> followup from https://www.reddit.com/r/RARE_freeRtr/comments/16vnync/explanation_needed_p4lang_export_of_bridges_and/
> the issue is that if i try it with the p4lang, not all routers are created …
mc36 updated
6 months ago
-
#### Description
VRF yang model doesn't contain VNI field. The VNI field is required for EVPN configuration.
https://github.com/sonic-net/sonic-buildimage/blob/master/src/sonic-yang-models/yang…
-
### Community Note
* Please vote on this issue by adding a 👍 [reaction](https://blog.github.com/2016-03-10-add-reactions-to-pull-requests-issues-and-comments/) to the original issue to help the…
-
The main problem of interop Juniper and FRR (Version > 7.4) is different EVPN implementation, Juniper uses VLAN-Aware ([rfc7432 sec 6.3](https://datatracker.ietf.org/doc/html/rfc7432#section-6.3)), bu…
-
#### Description
In EVPN vxlan scenario with proper graceful restart config inside FRR, there is traffic loss during warm-reboot
#### Steps to reproduce the issue:
Topology: two switches connec…
-
##### SUMMARY
The nxos_route_maps module does not appear to support 'set ip next-hop ...' as required for BGP EVPN configuration in https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000…