-
**Printer type** - [MINI]
**Printer firmware version** - 4.4.1
**Original or Custom firmware** - custom Llama
**Optional upgrades** - runout censor, Slice Mosquito hotend with Suunto 25mm fan…
-
Hi for some reason fan2 is suddenly at 100% duty cycle all the time, even after rewrite or reset. So I was wondering if there are schematics available for this board in order to find the issue.
I ca…
-
Hi there, appreciate the good work but I tried to combine this card with some of my switches using a vertical stack card. The card shows the live feed but the PTZ controls doesn't work. The following…
-
### What issue do you have? Please be as thorough and explicit as possible.
After adding H7126 Air Purifier Lite there is no control for fan speed. In Homebridge accessories, I can power the devi…
-
### Problem
With the new iOS version the setting for Fan mode (manual or auto) is inside a sub-setting menu and it's not very easy to use siri stock voice commands to just on and off the fan
###…
-
Hi,
Thanks for good piece of software.
I've it installed on OSMC/Debian Bullseye and if `arongoned` is started relatively early, i.e. for basic.target and also for multi-user.target, even if it…
-
Was using Ctrl-X to put the camera outside the ship in "free mode" (hit space 2x after Ctrl-x), and noticed the controls becoming a bit sluggish, which was weird. Switched to another window for a bit…
-
Hello,
When the esp device becomes unavailable the light turns on. Is there a way to disable this behaviour.
-
Hi guys,
Before anything, thank you very much to keep this tool available for us, I been using it for many years with my Dell/AW computers.
Now I have 51m-R2 and is almost working, meaning that…
-
This is mainly relevant for the UX481FA/FL since the UX581/UX582 models have a media key + native ACPI implementation for toggling thermal policy. For all models, both (2) fans are controlled by the B…