-
There are teachers embracing robotics, I presume you m.i.g.h.t have an interest in this… I do not know if android is compatible with old school technology (see image) but the sensors of device could b…
-
# Unlit Mechanics
- [x] Campfire Unlit Icon
- [x] Soul Campfire Unlit Icon
- [x] Boric Campfire Unlit Icon
- [x] Cryptic Campfire Unlit Icon
- [x] Ender Campfire Unlit Icon
- [ ] Fix Boric & Cry…
-
The current state of the repo (commit 82c5bbeabd6e6594d2cbb3c68f4fab4b7749a124) does not show a response when the seat heater buttons are tapped, and the middle dials do not reflect change in the left…
-
Hello. I believe there may be an issue with the firmware causing the nozzle and bed Temps to drop during probing; in my instance with a bltouch. Reproducible even after PID tunings, new thermistor, an…
-
Hi!
Testing out this app, and wanted to create a couple of thermostats for my wall heaters.
I’ve set up a couple of variables in Homey Logic which are changed by the thermostat “set” temperature - …
-
When using e.g. VR32 for connecting one eBUS to another and providing access to a single device in the second bus on a dedicated address on the first bus, the communication timing is no longer specifi…
-
Getting spammed with "heater time out" While doing a UBL bed mesh, I can't find an option to tell it to ignore when long commands are running. Its not turning my heater off (thankfully, as i do a 100…
-
Can you please tell me how the pins of ESP32 are mapped to driver outputs, heaters and fans i.e in schematic I can see them connected through STC15W408AS controller which is communicating with esp32 u…
-
Hello, I am trying to control a thermistor for the inside of the machine, I have installed the thermistor in T0 but klipper tells me the following after adding the line to my klipperExpander.cfg file
…
-
To be aware of high load of electrical heater such as heat pump or MyPV heaters etc it would be great to have a heater device in dbus like ev charger but in combination with temperature values (of wat…