-
Just a question, but I see a number of projects using the swicago library to set current room temperature in the heatpump.
https://github.com/SwiCago/HeatPump/blob/5d1e146771d2f458907a855bf9d5d4b9b…
-
Hi code owners and contributers,
many thanks for this project. Heishamon allowed me to optimize jeisha performance to my quite sensible existing hydraulic system.
I control my heatpump using Node …
-
For my scenario I want to add a solar boiler technology. I am struggeling to think of a way to add this in ETMoses. I can use the profile of a PV panel and was thinking of applying this profile to a h…
-
Hi,
Someone came to me to ask if your project can work on my ready-made PCB which is used for Panasonic heatpumps (Aquaread H and J types): https://www.tindie.com/products/thehognl/heishamon-communi…
-
@JosSchering1 has requested for this issue to be assigned to him.
I have had a bit of a further play with the 1.8.0 snapshot binding (with the BRP072A42) have found one minor issue, but it doesn't st…
-
I suggest a small refactoring, where the actual critical logic of MitsuRunner would be separated from the configuration of a device and other configurations not directly related to MitsuRunner. The go…
-
Hey all,
I've got this working on all my Mitsubishi heatpumps (mainly msz-ap20vg units), and it's working well. I'm using ESP-01, with breakout boards.
I notice that about once per second, the blu…
-
Hi,
which setting do I have to add on HeishaMon to get the command points in MQTT?
- Listen only mode is deactivated
- rest of the data is correct delivered to MQTT
- no command mode is shown
…
Skol6 updated
10 months ago
-
I can no longer connect through the integration.
With a seperate modbus poller I can still just see the registers of my heatpump.
any advice on how to troubleshoot?
-
Hey marq,
Just an idea. I made this card using picture-elements card for my Waterkotte Heatpump (EcoTouch Geo).
My goal was to imitate the initial Screen when you are directly working on Waterpump d…