-
2021-12-16 23:06:18 INFO (MainThread) [custom_components.midea_dehumidifier] midea_dehumidifier: initializing platform...
2021-12-16 23:06:18 DEBUG (MainThread) [custom_components.midea_dehumidifier]…
-
I suspect you're aware of this, but I thought I'd raise the issue just so it's documented.
After an update to 2024.1.0
```
2024-01-03 20:08:05.359 WARNING (MainThread) [homeassistant.components…
-
Per system requirements in Valispace (RW-SYS-063 "The device shall be have the ability to integrate a hot water humidifier...", RW-SYS-137 "Ventilator shall operate at altitudes below 10k ft"), the de…
-
### The problem
After 2024.8.0 update, in log:
Something is blocking Home Assistant from wrapping up the start up phase. We're going to continue anyway. Please report the following info...
### Wh…
-
### Home Assistant log
Logs
```
Copy/paste any log here, between the starting and ending backticks. The first log line must start with "Found the following devices:".
```
### Additional i…
-
As far as I found on the internet also the Daikin Air Purifiers are controlled using the onecta app, these are currently not supported by this integration. I don't have such a device to test, so user …
-
I'm able to get the status of the device and discuss with it.
But I receive this error when I try to set a value.
NB: apps closed, try timeout, removed persist and accessories folder
I see two …
-
Hi,
thanks for developing this HA custom component. It works well with my Comfee MDDF-20DEN7-WF dehumidifier.
There is one issue though: when the device is disconnected from the network (e.g. when…
-
1. Select which chart to show based on specific growing stage like on website
2. VPD Sensor created based on calcuated VPD
-
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubu…