-
In the [latest jenkins build](https://jenkins.twrp.me/job/d852-prod/8/) it seems that the image is a tad too big:
```
[36m----- Making recovery image ------[0m
/builds/out/target/product/d852/r…
-
Hello @allenh1 !
I wanted to compile ros1 and ros2 (using rosbridge) into a single yocto image. Turns out, at least to my research in that area, that it is [not quite possible](https://github.com/r…
-
*Sent by MedMCQ (medmcqau@gmail.com). Created by [fire](https://fire.fundersclub.com/).*
---
Hej Thomas
Igen, igen, igen - tak for dit arbejde med denne her side!
Der er en fejl p� 9. semester-sp�r…
-
```
Which device (manufacturer, type)? Lge ls670
Which firmware is installed?2.2.2 zvd
What version of wireless tether are you using?3.1 pre100 and b6
What steps will reproduce the problem?
1.run i…
-
```
Which device (manufacturer, type)? LGE Vortex
Which firmware is installed? 2.2.2
What version of wireless tether are you using? Latest Version
What steps will reproduce the problem?
1. Turning …
-
When I attach a picture when writing a SMS text, and sent it, after few seconds, "failed!" appear.
Reload the process does not solve the problem.
I never managed to send any picture.
It I start wit…
-
Hi @robwoolley @bengelman,
This repository was noticed by the maintainers of meta-ros (cc @herb-kuta-lge) where we are generating recipes automatically from the rosdistro using a tool [superflore](…
-
**Is your feature request related to a problem? Please describe.**
With the present, amazing thinq support, it is not possible to get access to the data from the many sensors in an LG HVAC system.
…
-
Using the recommended VLAN naming convention (e.g. `lagg0.16`) from the [handbook](https://www.freebsd.org/doc/handbook/network-vlan.html), chyves doesn't recognise it as a valid interface for attachi…
-
I used this
toolchain:
wget https://releases.linaro.org/components/toolchain/binaries/4.9-2016.02/arm-linux-gnueabihf/gcc-linaro-4.9-2016.02-x86_64_arm-linux-gnueabihf.tar.xz
kernel source:
git cl…