-
When using LowPower.attachAdcInterrupt from Adruino LowPower on the Adafruit Feather M0 LoRaWAN, the devices freezes after wakeup from LowPower.sleep() upon calling any draw function unless begin() is…
-
i am plant it in street lights, so i need instant message with otherts continusly, so your repo support Class-C?
-
### Summary
Gateways with multiple concentrators (i.e. a 16ch gateway) can listen on more than one LoRa standard channel but this is not supported in the frequency plan [definitions](https://github.c…
-
`I've tested the LoRaWANTestOTAA.ino in this repo. Also, I created a new SPI following this tutorial: https://learn.adafruit.com/using-atsamd21-sercom-to-add-more-spi-i2c-serial-ports/creating-a-new-s…
k8zxc updated
4 years ago
-
**Project:**
_Company Onboarding Pack_
**Elevator Pitch:**
Success of the Helium Network depends on getting a large number of devices onto the network. High number of devices will come from l…
-
### Summary
I would like to see the device attributes which are set on TTS console to appear in the json I receive via the webhook. This would allow me to have a stateless lambda function process the…
-
Implementing the latest LoRaMAC release (a.k.a. 4.70) I noticed a strange behaviour in the Duty Cycle management using EU868.
To provoke it, make a node try to join unsuccessfully using OTAA (unkno…
-
#### Summary
ADR algorithm implemented in `TTS V3` is only increasing the Data Rate when there is good network coverage and not decreasing it even when the network coverage gets worse.
Ref: http…
-
Hey,
I bought a CubeCell recently. The (battery/solar powered) device will read data from an external (wind) sensor and send received data via LoRaWan (TTN). LoRa-uplink works fine (except some frame…
-
#### Summary
Support downstream resending traffic out-of-order
Replaces https://github.com/TheThingsIndustries/lorawan-stack/issues/2114
#### Why do we need this?
For processing (a…