-
Hopefully the title isn't too confusing, But let me explain the steps i went through and the problem im seeing.
1. Set an interpreter that isn't default (I'm using one in a venv)
2. Install custo…
-
It would be super useful to have the same place to access the device via a WebREPL if that has been set up, or directly via a serial port if it hasn't. The WebUSB API (https://developers.google.com/we…
-
The network security protocols that can be handled are listed as WEP, WPA-PSK and WPA2-PSK. Are there any plans to support WPA2-Enterprise PEAP in the near future? Would love to see that included.
-
I tried using the webrepl on my pyboard-D but it doesn't go further than entering my password. After that, nothing happens. Not even the repl output gets sent to the webrepl. Sending/Receiving files a…
-
After flashing with:
> esptool.py --port /dev/ttyUSB0 --baud 1000000 write_flash --flash_size=4MB --flash_mode dio 0 --verify
```
Serial port /dev/ttyUSB0
Connecting....
Detecting chip type...…
-
Just a few thoughts, no concrete timeline now. No guarantee, it may not happen at all.
* Upgrade to LVGL v7 (or v8 if released) and the lastest stable MicroPython
* For scheduler mechanism, repla…
-
As there is no pre-built firmware available, and there are quite a few build dependencies, I think it would be nice to include that and lower the barrier to entry. If there is any interest, I would be…
-
Running on a Tulip CC with unmodified `tulip-firmware-TULIP4_R11.bin`.
Attempting to connect to a random neighbours network (with the wrong password) returns an empty prompt after a second or two.
…
-
Can you submit this file to https://github.com/micropython/micropython-lib/tree/master/micropython/drivers/display Then it would be near the SSD1306 driver.
You could submit the file itself or ask…
-
I get an error when trying to get into the python shell by using `repl`
```
mpfs [/]> repl
Traceback (most recent call last):
File "/usr/local/bin/mpfshell", line 11, in
load_entry_point…